Call : +86371-67758691

6YZ-260 Hydraulic Oil Press Machine

GO BACK
 

6YZ-260 Hydraulic Oil Press Machine Introduction
The hydraulic oil press machine is widely used in squeezing oil from vegetable oil seed,such as soybean, sesame, cocoa beans, peanut, sunflower seed, cotton seed, tea seed, copra, jatropha curcas, castor seed ,etc.. It is specially good for the palm fruit better after adjusting its structure. After pressed, the oil is very pure  with good smell, can be edible for people directly. It is made of stainless steel , so the oil can reach the healthy standard . Which is do good to people health. his is machine is very suitable for family using and small scale oil factories.

 

Best Sale of 6YZ-260 Hydraulic Oil Press Machine With High Quality
 

6YZ-260 Hydraulic Oil Press Machine Application
The machine adopts the forced feeding device. It has a uniform feeding rate and a high pressing speed. It can press peanut, soybean, rapeseed, sesame, sunflower, flax seed, tea seed, cottonseed, pepper seeds, walnuts, Tung seed, castor, almonds and other oil crops widely. Suitable for cold pressing or hot pressing any oil seeds and oil plant, such as palm fruit, palm kernel, coconut, peanut, cashew, avocado, tiger nut, rapeseeds, peanut, sesameseeds, etc.

 

Best Sale of 6YZ-260 Hydraulic Oil Press Machine With High Quality

 
Main Parts of 6YZ-260 Hydraulic Oil Press Machine

1. Main engine
Main engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring ,then it being droved up by the oil cylinder piston ,oil will outflow from the gap of press boring ,and then pass the oil drip pan to the drum for oil storage.

2. Hydraulic system
Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; handoperated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world, and compared with two plunger pump, it is faster , higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 but needn’t cooling unit.

3. Electronic system
Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate, and there’s no special request to the operator, so this machine is particularly suitable for peasant. This machine is composed of motor, volt meter, pressure gauge, power insurance and so on.

The Advantages of 6YZ-260 Hydraulic Oil Press Machine

1.Extensive range of presses:(Can be achieved in two ways: hot pressing and cold pressing)
It is widely used for various oil seeds, such as sesame, flaxseed, peanut, rape seed, wheat embryo, maize embryo, walnut, soybean, peanut, sunflower seed, pine nuts, almond, olive, Queensland nut, camellia seed, pepper, mustard seed, purple perilla, etc..

2.Good oil quality
Pure physical press, the oil rate is high, the process does not produce the temperature, do not destroy the organic ingredients of oil, good oil, less impurities, high cake value, wide range of applications.

3.Easy to operate, high efficiency
Electromechanical integration design, low failure rate, high degree of automation, from loading to the cake only need 8-10 minutes to complete, the appearance is fine, one person can operate 3-4 sets.


4.Optimization of the gear transmission
Take the helical gear and straight tooth matching design principle, chose the most reasonable gear ration to maximize energy transfer loss less, chieving efficieng, stable, noise reduction transmission of effect.

5. Multistage press
In order to further improve the quality of oil and meal, the press bore was successfully upgraded to the multistage press, then once again leading the development direction of oil mill.

6. Increased abrasion resistance
The oil 
mill’s round row, worm, strip row cause abrasion under pressure. In order to increase abrasion resistance, the factory take cost to update the heat treatment equipment, thus improving the heat treatment temperature and carburizing depth, prolonging the service life of wearing parts, reducing the cost of users.
 

Best Sale of 6YZ-260 Hydraulic Oil Press Machine With High Quality

Hydraulic Oil Press Machine Main Technical Parameters
 
Model 6YZ-150 6YZ-180 6YZ-230 6YZ-260 6YZ-320
Barrel diameter(mm) Ø150 Ø185 Ø230 Ø260 Ø320
Loading weight(kg) 2 4 8 11 15
Each press time(min) 8 8 10 12 12
Nominal pressure(Mpa) 55 55 55 55 50
Working pressure(t) 65 100 175 230 265
Power Host(kw) 0.75 1.5 1.5 1.5 2.2
Heater(kw) 0.6 0.8 0.9 1.0 1.2
Overall weight(kg) 250 500 810 1246 1750
Dimension(mm) 400×500×850 750×950×1130 760×1050×1450 900×1100×1600 900×1250×1750

CONTACT US